Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
2-56 SecureStack A2 Configuration Guide
2.1.12.7 show system utilization
Use this command to display detailed information about the processor running on the switch, or the
overall memory usage of the Flash and SDRAM storage devices on the unit, or the processes
running on the switch. Only the memory usage in the master unit of a stack is shown.
show system utilization {cpu | storage | process}
Syntax Description
Command Defaults
None.
Command Mode
Read-Only.
Examples
This example shows how to display the system’s cpu utilization:
This example shows how to display the system’s overall memory usage:
cpu Display information about the processor running on the
switch.
storage Display information about the overall memory usage on
the switch.
process Display information about the processes running on the
switch.
A2(ro)->show system utilization cpu
Total CPU Utilization:
Switch CPU 5 sec 1 min 5 min
-----------------------------------------------
1 1 3% 1% 1%
A2(su)->show system utilization storage
Storage Utilization:
Type Description Size(Kb) Available (Kb)
---------------------------------------------------------------
RAM RAM device 131072 23217
Flash Images, Config, Other 15740 2528