Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
SecureStack A2 Configuration Guide 2-47
2.1.12 Setting Basic Device Properties
Purpose
To display and set the system IP address and other basic system (switch) properties, including time,
contact name and version information.
Commands
The commands used to set basic system information are listed below and described in the associated
section as shown.
• show ip address (Section 2.1.12.1)
• show ip protocol (Section 2.1.12.2)
• set ip address (Section 2.1.12.3)
• clear ip address (Section 2.1.12.4)
• show system (Section 2.1.12.5)
• show system hardware (Section 2.1.12.6)
• show system utilization (Section 2.1.12.7)
• set system enhancedbuffermode (Section 2.1.12.8)
• show time (Section 2.1.12.9)
• set time (Section 2.1.12.10)
• show summertime (Section 2.1.12.11)
• set summertime (Section 2.1.12.12)
• set summertime date (Section 2.1.12.13)
• set summertime recurring (Section 2.1.12.14)
• clear summertime (Section 2.1.12.15)
• set prompt (Section 2.1.12.16)
• show banner motd (Section 2.1.12.17)
• set banner motd (Section 2.1.12.18)
• clear banner motd (Section 2.1.12.19)
• show version (Section 2.1.12.20)