Specifications

Startup and General Configuration Summary
Configuring Switches in a Stack
2-34 SecureStack A2 Configuration Guide
2.1.10.9 set switch member
Use this command to specify a unit as a non-existent member of a future stack.
set switch member unit switch-id
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to specify a switch as unit 1 with an switch ID of 1:
unit Specifies a unit number for the switch.
switch-id Specifies a switch ID number for the switch.
A2(rw)->set switch member 1 1