Specifications

RMON Command Set
Filter Group Commands
SecureStack A2 Configuration Guide 12-29
12.2.5.2 set rmon channel
Use this command to configure an RMON channel entry.
set rmon channel index port-string [accept {matched | failed}] [control {on |
off}] [description description] [owner owner]
Syntax Description
Command Defaults
• If an action is not specified, packets will be accepted on filter matches.
• If not specified, control will be set to off.
• If a description is not specified, none will be applied.
• If owner is not specified, it will be set to monitor.
Command Mode
Read-Write.
index Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 2. Maximum value
is 65535.
port-string Specifies the port on which traffic will be monitored.
accept matched |
failed
(Optional) Specifies the action of the filters on this
channel as:
• matched - Packets will be accepted on filter matches
• failed - Packets will be accepted if they fail a match
control on | off (Optional) Enables or disables control of the flow of data
through the channel.
description
description
(Optional) Specifies a description for this channel.
owner owner (Optional) Specifies the name of the entity that configured
this entry.