Specifications

RMON Command Set
Event Group Commands
12-22 SecureStack A2 Configuration Guide
12.2.4.1 show rmon event
Use this command to display RMON event entry properties.
show rmon event [index]
Syntax Description
Command Defaults
If index is not specified, information about all RMON entries will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display RMON event entry 3:
Table 12-4 provides an explanation of the command output.
index (Optional) Displays RMON properties and log entries for a
specific entry index ID.
A2(rw)->show rmon event 3
Index 3
----------------
Owner = Manager
Status = valid
Description = STP Topology change
Type = log-and-trap
Community = public
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 12-4 show rmon event Output Details
Output What It Displays...
Index Index number for this event entry.
Owner Text string identifying who configured this entry.
Status Whether this event entry is enabled (valid) or disabled.
Description Text string description of this event.
Type Whether the event notification will be a log entry, and SNMP trap,
both, or none.