Specifications

Startup and General Configuration Summary
Configuring Switches in a Stack
SecureStack A2 Configuration Guide 2-29
2.1.10.4 show switch stack-ports
Use this command to display various data flow and error counters on stack ports.
show switch stack-ports
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Examples
This example shows how to display data and error information on stack ports:
A2(rw)->show switch stack-ports
------------TX-------------- ------------RX-----------
Data Error Data Error
Stacking Rate Rate Total Rate Rate Total
Switch Port (Mb/s) (Errors/s) Errors (Mb/s) (Errors/s) Errors
------ ---------- ------ ---------- ---------- ------ ---------- --------
1 Up 0 0 0 0 0 0
Down 0 0 0 0 0 0