Specifications

RMON Monitoring Group Functions
12-2 SecureStack A2 Configuration Guide
Alarm Periodically gathers
statistical samples from
variables in the probe and
compares them with
previously configured
thresholds. If the monitored
variable crosses a threshold,
an event is generated.
Alarm type, interval, starting
threshold, stop threshold.
show rmon alarm
(Section 12.2.3.1)
set rmon alarm properties
(Section 12.2.3.2)
set rmon alarm status
(Section 12.2.3.3)
clear rmon alarm
(Section 12.2.3.4)
Event Controls the generation and
notification of events from
the device.
Event type, description, last
time event was sent.
show rmon event
(Section 12.2.4.1)
set rmon event properties
(Section 12.2.4.2)
set rmon event status
(Section 12.2.4.3)
clear rmon event
(Section 12.2.4.4)
Filter Allows packets to be
matched by a filter equation.
These matched packets
form a data stream or
“channel” that may be
captured.
Packets matching the filter
configuration.
show rmon channel
(Section 12.2.5.1)
set rmon channel
(Section 12.2.5.2)
clear rmon channel
(Section 12.2.5.3)
show rmon filter
(Section 12.2.5.4)
set rmon filter
(Section 12.2.5.5)
clear rmon filter
(Section 12.2.5.6)
Packet
Capture
Allows packets to be
captured upon a filter match.
Packets matching the filter
configuration.
show rmon capture
(Section 12.2.6.1)
set rmon capture
(Section 12.2.6.2)
clear rmon capture
(Section 12.2.6.3)
Table 12-1 RMON Monitoring Group Functions and Commands (Continued)
RMON
Group
What It Does... What It Monitors... CLI Command(s)