Specifications

Startup and General Configuration Summary
Configuring Switches in a Stack
SecureStack A2 Configuration Guide 2-27
This example shows how to display information for switch unit 1 in the stack:
This example shows how to display status information for switch unit 1 in the stack:
A2(rw)->show switch 1
Switch 1
Management Status Management Switch
Hardware Management Preference Unassigned
Admin Management Preference Unassigned
Switch Type A2H124-48
Preconfigured Model Identifier A2H124-48
Plugged-in Model Identifier A2H124-48
Switch Status OK
Switch Description Enterasys Networks, Inc. A2 -- Model
A2H124-48
Detected Code Version 01.00.26
Detected Code in Flash 01.00.26
Detected Code in Back Image 01.00.25
Up Time 0 days 0 hrs 0 mins 34 secs
A2(su)->
A2(rw)->show switch status 1
Switch 1
Switch Status Full
Admin State
Power State
Inserted Switch:
Model Identifier A2H124-48
Description Enterasys Networks, Inc. A2 -- Model
A2H124-48
Configured Switch:
Model Identifier A2H124-48
Description Enterasys Networks, Inc. A2 -- Model
A2H124-48
A2(su)->