Specifications

Logging And Network Management Command Set
Configuring Node Aliases
11-42 SecureStack A2 Configuration Guide
11.2.5.2 set nodealias
Use this command to enable or disable a node alias agent on one or more ports, or set the maximum
number of alias entries per port. Upon packet reception, node aliases are dynamically assigned to
ports enabled with an alias agent, which is the default setting on SecureStack A2 devices. Node
aliases cannot be statically created, but can be deleted using the clear node alias config command
as described in Section 11.2.5.3
.
set nodealias {enable | disable | maxentries} port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable the node alias agent on fe.1.3
:
enable | disable Enables or disables a node alias agent.
maxentries Set the maximum number of alias entries per ports
port-string Specifies the port(s) on which to enable/disable node alias
agent or set a maximum number of entries. For a detailed
description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->set nodealias disable fe.1.3