Specifications

Logging And Network Management Command Set
Configuring Node Aliases
SecureStack A2 Configuration Guide 11-41
11.2.5.1 show nodealias config
Use this command to display node alias properties for one or more ports.
show nodealias config [port-string]
Syntax Description
Command Defaults
If port-string is not specified, node alias properties will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display node alias properties for fe.1.10:
port-string (Optional) Displays node alias properties for specific
port(s). For a detailed description of possible port-string
values, refer to Section 3.1.1.
A2(rw)->show nodealias config fe.1.10
Port Number Max Entries Used Entries Status
----------- ----------- ------------ ----------
fe.1.10 32 0 Enable