Specifications

Logging And Network Management Command Set
Configuring Node Aliases
11-40 SecureStack A2 Configuration Guide
11.2.5 Configuring Node Aliases
Purpose
To review, configure, disable, and re-enable node (port) alias functionality, which determines what
network protocols are running on one or more ports.
Commands
Commands to configure node aliases are listed below and described in the associated section as
shown.
• show nodealias config (Section 11.2.5.1)
• set nodealias (Section 11.2.5.2)
• clear nodealias config (Section 11.2.5.3)