Specifications

Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
SecureStack A2 Configuration Guide 11-29
Table 11-3 show sntp Output Details
Output What It Displays...
SNTP Version SNTP version number.
Current Time Current time on the system clock.
Timezone Time zone name and amount it is offset from UTC (Universal
Time).
Client Mode Whether SNTP client is operating in unicast or broadcast mode.
Set using set sntp client command (Section 11.2.4.2).
Broadcast Count Number of SNTP broadcast frames received.
Poll Interval Interval between SNTP unicast requests. Default of 512 seconds
can be reset using the set sntp poll-interval command
(Section 11.2.4.6).
Poll Retry Number of poll retries to a unicast SNTP server. Default of 1 can
be reset using the set sntp poll-retry command
(Section 11.2.4.8).
Poll Timeout Timeout for a response to a unicast SNTP request. Default of 5
seconds can be reset using set sntp poll-timeout command
(Section 11.2.4.11).
SNTP Poll Requests Total number of SNTP poll requests.
Last SNTP Update Date and time of most recent SNTP update.
Last SNTP Request Date and time of most recent SNTP request.
Last SNTP Status Whether or not broadcast reception or unicast transmission and
reception was successful.
SNTP-Server IP address(es) of SNTP server(s).
Precedence Precedence level of SNTP server in relation to its peers. Highest
precedence is 1 and lowest is 10. Default of 1 can be reset using
the set sntp server command (Section 11.2.4.4).
Status Whether or not the SNTP server is active.