Specifications

Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
SecureStack A2 Configuration Guide 11-27
11.2.4 Configuring Simple Network Time Protocol (SNTP)
Purpose
To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network.
Commands
Commands to configure SNTP are listed below and described in the associated section as shown.
• show sntp (Section 11.2.4.1)
• set sntp client (Section 11.2.4.2)
• clear sntp client (Section 11.2.4.3)
• set sntp server (Section 11.2.4.4)
• clear sntp server (Section 11.2.4.5)
• set sntp poll-interval (Section 11.2.4.6)
• clear sntp poll-interval (Section 11.2.4.7)
• set sntp poll-retry (Section 11.2.4.8)
• clear sntp poll-retry (Section 11.2.4.9)
• set sntp poll-timeout (Section 11.2.4.10)
• clear sntp poll-timeout (Section 11.2.4.11)