Specifications

Logging And Network Management Command Set
Configuring System Logging
11-2 SecureStack A2 Configuration Guide
11.2 LOGGING AND NETWORK MANAGEMENT COMMAND SET
11.2.1 Configuring System Logging
Purpose
To display and configure system logging, including Syslog server settings, logging severity levels
for various applications, Syslog default settings, and the logging buffer.
Commands
Commands to configure system logging are listed below and described in the associated section as
shown.
• show logging server (Section 11.2.1.1)
• set logging server (Section 11.2.1.2)
• clear logging server (Section 11.2.1.3)
• show logging default (Section 11.2.1.4)
• set logging default (Section 11.2.1.5)
• clear logging default (Section 11.2.1.6)
• show logging local (Section 11.2.1.7)
• set logging local (Section 11.2.1.8)
• clear logging local (Section 11.2.1.9)
• show logging buffer (Section 11.2.1.10)