Specifications

Security Configuration Command Set
Configuring MAC Locking
10-78 SecureStack A2 Configuration Guide
10.3.6.11 set maclock move
Use this command to move all current first arrival MACs to static entries. If there are more
firstarrival MACs than the allowed maximum static MACs, then only the latest firstarrival MACS
will be used. For example, if the set maclock static command was used to set the maximum number
of static MACs to 2, then the set maclock move command was used, but there were 5 MACs in the
first arrival table, only the 2 most recent MAC entries would be used.
set maclock move port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to move all current first arrival MACs to static entries on ports fe.3.1-40:
port-string Specifies the port on which MAC will be move from first
arrival MACs to static entries. For a detailed description
of possible port-string values, refer to Section 3.1.1.
A2(rw)->set maclock move fe.3.1-40