Specifications

Security Configuration Command Set
Configuring MAC Locking
SecureStack A2 Configuration Guide 10-75
10.3.6.8 clear maclock static
Use this command to reset the number of static MAC addresses allowed per port to the default value
of 20.
clear maclock static port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to reset the number of allowable static MACs on fe.2.3:
port-string Specifies the port on which to reset number of static MAC
addresses allowed. For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(rw)->clear maclock static fe.2.3