Specifications

Security Configuration Command Set
Configuring MAC Locking
10-74 SecureStack A2 Configuration Guide
10.3.6.7 set maclock static
Use this command to set the maximum number of static MAC addresses allowed per port. Static
MACs are administratively defined.
set maclock static port-string value
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the maximum number of allowable static MACs to 2 on fe.3.1:
port-string Specifies the port on which to set the maximum number of
static MACs allowed. For a detailed description of
possible port-string values, refer to Section 3.1.1.
value Specifies the maximum number of static MAC addresses
allowed per port. Valid values are 0 to 20.
A2(rw)->set maclock static fe.3.1 2