Specifications

Security Configuration Command Set
Configuring MAC Locking
SecureStack A2 Configuration Guide 10-73
10.3.6.6 clear maclock
Use this command to remove a static maclock MAC address entry. The MAC address that is cleared
will no longer be able to communicate on the port unless the first arrival limit has been set to a value
greater than 0 and this limit has not yet been met.
For example, if user B’s MAC is removed from the static MAC address list and the first arrival limit
has been set to 0, then user B will not be able to communicate on the port. If user A’s MAC is
removed from the static MAC address list and the first arrival limit has been set to 10, but only has
7 entries, user A will become the 8th entry and allowed to communicate on the port.
clear maclock mac_address port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to remove a MAC from the list of static MACs allowed to communicate
on port fe.3.2:
mac_address Specifies the MAC address that will be removed from the
list of static MACs allowed to communicate on the port.
port-string Specifies the port on which to clear the MAC address. For
a detailed description of possible port-string values, refer
to Section 3.1.1.
A2(rw)->clear maclock 0e:03:ef:d8:44:55 fe.3.2