Specifications

Security Configuration Command Set
Configuring MAC Locking
10-68 SecureStack A2 Configuration Guide
10.3.6.2 show maclock stations
Use this command to display MAC locking information about end stations connected to the device.
show maclock stations [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC locking information will be displayed for all
end stations.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Fast Ethernet ports in unit 3:
Table 10-7 provides an explanation of the command output.
port-string (Optional) Displays end station information for specified
port(s). For a detailed description of possible port-string
values, refer to Section 3.1.1.
A2(rw)->show maclock stations fe.3.*
Port Number MAC Address Status State
------------ ----------------- -------------- --------------
fe.3.2 0e:03:ef:d8:0e:03 active static
fe.3.2 00:00:1d:c3:61:f8 active first arrival
fe.3.2 00:00:5e:00:01:01 active first arrival
fe.3.2 00:01:f4:da:5a:53 active first arrival