Specifications

Security Configuration Command Set
Configuring MAC Locking
10-66 SecureStack A2 Configuration Guide
10.3.6.1 show maclock
Use this command to display the status of MAC locking on one or more ports.
show maclock [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC locking status will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for ports fe.3.1-5:
Table 10-6 provides an explanation of the command output.
port-string (Optional) Displays MAC locking status for specified
port(s). For a detailed description of possible port-string
values, refer to Section 3.1.1.
A2(rw)->show maclock fe.3.1-5
MAC locking is globally enabled
Port Port Trap Max Static Max FirstArrival Violating
Number Status Status Allocated Allocated MAC Address
-------- -------- -------- ---------- ---------------- -----------------
fe.3.1 disabled disabled 2 600 00:00:00:00:00:00
fe.3.2 enabled disabled 20 600 00:00:00:00:00:00
fe.3.3 disabled disabled 20 600 00:00:00:00:00:00
fe.3.4 disabled disabled 20 600 00:00:00:00:00:00
fe.3.5 disabled disabled 20 600 00:00:00:00:00:00