Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
SecureStack A2 Configuration Guide 10-63
10.3.5.4 show vlanauthorization
This command displays the VLAN authorization status and configuration information for the
specified ports.
show vlanauthorization [port-string]
Syntax Description
Command Mode
Read-Only.
Command Defaults
If no port string is entered, the status for all ports will be displayed.
Example
This command shows how to display VLAN authorization status for Fast Ethernet port 1 on unit 1.
Table 10-5 provides an explanation of command output. For details on using the set
vlanauthorization command to enable and assign protocol and egress attributes,
refer to sections Section 10.3.5.1 and Section 10.3.5.2.
port-string (Optional) Displays VLAN authorization status for the
specified ports. For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(rw)-> show vlanauthorization fe.1.1
port status administrative egress operational egress vlan id
----- ------- ------------------------- --------------------- --------
fe.1.1 enabled untagged none 0
Table 10-5 show vlanauthorization Output Details
Output What It Displays...
port Port identification
status Port status as assigned by set vlanauthorization command
administrative
egress
Port status as assigned by the set vlanauthorization egress
command