Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
10-62 SecureStack A2 Configuration Guide
10.3.5.3 clear vlanauthorization
Use this command to return port(s) to the default VLAN authorization configuration (disabled,
egress untagged).
clear vlanauthorization [port-string]
Syntax Description
Command Mode
Read-Write.
Command Defaults
If no port string is entered, all ports across the stack will be reset to the default
configuration with VLAN authorization disabled and egress frames untagged.
Example
This example shows how to clear VLAN authentication for all ports on slots 3, 4, and 5:
port-string (Optional) Specifies which ports are to be restored to
default configuration. If no port string is entered, the
action will be a global setting. For a detailed description
of possible port-string values, refer to Section 3.1.1.
clear vlanauthorization fe.3-5.*