Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
SecureStack A2 Configuration Guide 10-61
10.3.5.2 set vlanauthorization egress
Use this command to control the modification of the current VLAN egress list of 802.1x
authenticated ports for the VLAN(s) returned in the RADIUS authorization filter id string.
set vlanauthorization egress {none | tagged | untagged} port-string
Syntax Description
Command Mode
Read-Write.
Command Default
By default the administrative egress will be set to untagged.
Example
This example shows how to enable the insertion of the RADIUS assigned VLAN to an 802.1q tag
for all outbound frames for ports 10 thru 15 on unit number 3.
none No egress manipulation will be made.
tagged The authenticating port will be added to the current tagged
egress list for the VLAN-ID returned.
untagged The authenticating port will be added to the current
untagged egress list for the VLAN-ID returned (default).
port-string The port or list of ports to which this command will apply.
For a detailed description of possible port-string values,
refer to Section 3.1.1.
set vlanauthorization egress tagged fe.3.10-15