Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
10-60 SecureStack A2 Configuration Guide
10.3.5.1 set vlanauthorization
Use this command to enable or disable the use of the RADIUS VLAN tunnel attribute to put a port
into a particular VLAN based on the result of authentication.
set vlanauthorization {enable | disable} [port-string]
Syntax Description
Command Mode
Read-Write.
Command Defaults
VLAN authentication is disabled by default.
Examples
This example shows how to enable VLAN authentication for all Fast Ethernet ports:
This example shows how to disable VLAN authentication for all Fast Ethernet ports on stack unit 3:
enable | disable Enables or disables VLAN authorization/tunnel attributes
port-string (Optional) Specifies which ports to enable or disable the
use of VLAN tunnel attributes/authorization. For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)-> set vlanauthorization enable fe.*.*
A2(rw)-> set vlanauthorization disable fe.3.*