Specifications

Security Configuration Command Set
Configuring Multiple Authentication Methods
10-56 SecureStack A2 Configuration Guide
10.3.4.7 set multiauth port
Use this command to set multiple authentication properties for one or more ports.
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
Syntax Description
Command Mode
Read-Write.
Command Defaults
None
Example
This example shows how to set the port multiple authentication mode to required on fe.3.14:
mode auth-opt |
auth-reqd |
force-auth |
force-unauth
Specifies the port(s)’ multiple authentication mode as:
• auth-opt — Authentication optional (“non-strict”
behavior). If a user does not attempt to authenticate using
802.1x, or if 802.1x authentication fails, the port will
allow traffic to be forwarded according to the defined
default VLAN.
• auth-reqd — Authentication is required.
• force-auth — Authentication considered.
• force-unauth — Authentication disabled.
numusers
numusers
Specifies the number of users allowed authentication on
port(s).
port-string Specifies the port(s) on which to set multiple authentication
properties.
A2(rw)->set multiauth port mode auth-reqd fe.3.14