Specifications

Security Configuration Command Set
Configuring Multiple Authentication Methods
SecureStack A2 Configuration Guide 10-49
10.3.4 Configuring Multiple Authentication Methods
About Multiple Authentication
When enabled, multiple authentication allows users to authenticate using up to two methods on the
same port. In order for multiple authentication to function on the device, each possible method of
authentication (MAC authentication, 802.1X) must be enabled globally and configured
appropriately on the desired ports with its corresponding command set described in this chapter.
Multiple authentication mode must be globally enabled on the device using the set multiauth mode
command as described in Section 10.3.4.2.
Purpose
To review, enable, disable, and configure multiple authentication on ports.
Commands
The commands to configure multiple authentication are:
• show multiauth (Section 10.3.4.1)
• set multiauth mode (Section 10.3.4.2)
• clear multiauth mode (Section 10.3.4.3)
• set multiauth precedence (Section 10.3.4.4)
• clear multiauth precedence (Section 10.3.4.5)
• show multiauth port (Section 10.3.4.6)
• set multiauth port (Section 10.3.4.7)
• clear multiauth port (Section 10.3.4.8)
• show multiauth station (Section 10.3.4.9)