Specifications

Security Configuration Command Set
Configuring MAC Authentication
10-48 SecureStack A2 Configuration Guide
10.3.3.16 clear macauthentication portquietperiod
Use this command to clear the number of seconds following a failed authentication before another
attempted may be made on the port to the default setting.
set macauthentication portquietperiod time [port-string]
Syntax Description
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to clear the quiet period for ports fe.1.1-20:
time Quiet period in seconds between authentication attempts
port-string Specifies the port(s) on which to set the quiet period. For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->clear macauthentication portquietperiod fe.1.1-20