Specifications

Security Configuration Command Set
Configuring MAC Authentication
SecureStack A2 Configuration Guide 10-47
10.3.3.15 set macauthentication portquietperiod
Use this command to set the number of seconds following a failed authentication before another
attempted may be made on the port.
set macauthentication portquietperiod time [port-string]
Syntax Description
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the quiet period after a failed authentication attempt to 5 seconds
for ports fe.1.1-20:
time Quiet period in seconds between authentication attempts
port-string Specifies the port(s) on which to set the quiet period. For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->set macauthentication portquietperiod 5 fe.1.1-20