Specifications

Security Configuration Command Set
Configuring MAC Authentication
10-42 SecureStack A2 Configuration Guide
10.3.3.10 set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
set macauthentication reauthentication {enable | disable} port-string
Syntax Description
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable MAC reauthentication on fe.4.1 though 5:
enable | disable Enables or disables MAC reauthentication.
port-string Specifies port(s) on which to enable or disable MAC
reauthentication. For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(su)->set macauthentication reauthentication enable fe.4.1-5