Specifications

Security Configuration Command Set
Configuring MAC Authentication
10-34 SecureStack A2 Configuration Guide
10.3.3.2 show macauthentication session
Use this command to display the active MAC authenticated sessions.
show macauthentication session
Syntax Description
None.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC session information will be displayed for all
MAC authentication ports.
Example
This example shows how to display MAC session information:
Table 10-4 provides an explanation of the command output.
A2(su)->show macauthentication session
Port MAC Address Duration Reauth Period Reauthentications
----- ----------------- ---------- ------------- -----------------
fe.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled
Table 10-4 show macauthentication session Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string
values, refer to Section 3.1.1.
MAC Address MAC address associated with the session.
Duration Time this session has been active.
Reauth Period Reauthentication period for this port, set using the set
macauthentication reauthperiod command described in
Section 10.3.3.13.
Reauthentications Whether or not reauthentication is enabled or disabled on this
port. Set using the set macauthentication reauthentication
command described in Section 10.3.3.10.