Specifications

Security Configuration Command Set
Configuring MAC Authentication
10-32 SecureStack A2 Configuration Guide
10.3.3.1 show macauthentication
Use this command to display MAC authentication information for one or more ports.
show macauthentication [port-string]
Syntax Description
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC authentication information will be displayed
for all ports.
Example
This example shows how to display MAC authentication information for fe.2.1 through 8:
Table 10-3 provides an explanation of the command output.
port-string (Optional) Displays MAC authentication information for
specific port(s). For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(su)->show macauthentication fe.2.1-8
MAC authentication: - enabled
MAC user password: - NOPASSWORD
Port username significant bits - 48
Port Port Reauth Auth Auth Reauthentications
State Period Allowed Allocated
------- -------- ---------- -------- --------- -----------------
fe.2.1 disabled 3600 1 1 disabled
fe.2.2 disabled 3600 1 1 disabled
fe.2.3 disabled 3600 1 1 disabled
fe.2.4 disabled 3600 1 1 disabled
fe.2.5 disabled 3600 1 1 disabled
fe.2.6 disabled 3600 1 1 disabled
fe.2.7 disabled 3600 1 1 disabled
fe.2.8 disabled 3600 1 1 disabled