Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack A2 Configuration Guide 10-25
10.3.2.6 show eapol
Use this command to display EAPOL status or settings for one or more ports.
show eapol [port-string]
Syntax Description
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, only EAPOL enable status will be displayed.
Example
This example shows how to display EAPOL status for ports fe.1.1-3:
Table 10-2 provides an explanation of the command output. For details on using
the set eapol command to enable the protocol and assign an authentication mode,
refer to Section 10.3.2.7.
port-string (Optional) Displays EAPOL status for specific port(s). For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->show eapol fe.1.1-3
EAPOL is disabled.
Port Authentication State Authentication Mode
-------- -------------------- --------------------
fe.1.1 Initialized Auto
fe.1.2 Initialized Auto
fe.1.3 Initialized Auto
Table 10-2 show eapol Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string
values, refer to Section 3.1.1.