Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack A2 Configuration Guide 10-21
10.3.2.4 set dot1x auth-config
Use this command to configure 802.1X authentication.
set dot1x auth-config {[maxreq value] [quietperiod value] [reauthenabled
{false | true}] [reauthperiod value] [servertimeout timeout] [supptimeout
timeout] [txperiod value]} [port-string]
Syntax Description
Command Mode
Read-Write.
maxreq value Specifies the maximum number of authentication requests
allowed by the backend authentication state machine. Valid
values are 1 - 2147483647.
quietperiod value Specifies the time (in seconds) following a failed
authentication before another attempt can be made by the
authenticator PAE state machine. Valid values are 1-
2147483647.
reauthenabled
false | true
Enables (true) or disables (false) reauthentication control
of the reauthentication timer state machine.
reauthperiod
value
Specifies the time lapse (in seconds) between attempts by
the reauthentication timer state machine to reauthenticate a
port. Valid values are 1 - 2147483647.
servertimeout
timeout
Specifies a timeout period (in seconds) for the
authentication server, used by the backend authentication
state machine. Valid values are 1 - 2147483647.
supptimeout
timeout
Specifies a timeout period (in seconds) for the
authentication supplicant used by the backend
authentication state machine. Valid values are
1 -
2147483647.
txperiod value Specifies the period (in seconds) which passes between
authenticator PAE state machine EAP transmissions. Valid
values are 1 - 2147483647.
port-string (Optional) Limits the configuration of desired settings to
specified port(s). For a detailed description of possible
port-string values, refer to Section 3.1.1.