Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
10-20 SecureStack A2 Configuration Guide
10.3.2.3 set dot1x
Use this command to enable or disable 802.1X authentication, to reauthenticate one or more access
entities, or to reinitialize one or more supplicants.
Disabling 802.1X authentication globally, by not entering a specific port-string value, will enable
the EAP pass-through feature. EAP pass-through allows client authentication packets to be
forwarded unmodified through the SecureStack switch to an upstream device.
set dot1x {enable | disable | [port {init | reauth} {true | false} port-string]}
Syntax Description
Command Mode
Read-Write.
Command Defaults
If no ports are specified, the reinitialization or reauthentication setting will be
applied to all ports.
Examples
This example shows how to enable 802.1X:
This example shows how to reinitialize fe.1.2:
enable | disable Enables or disables 802.1X.
port Enable or disable 802.1X reauthentication or initialization
control.
init | reauth Configure initialization or reauthentication control.
true | false Enables (true) or disables (false)
reinitialization/reauthentication.
port-string (Optional) Specifies the port(s) to reinitialize or
reauthenticate.
A2(rw)->set dot1x enable
A2(rw)->set dot1x port init true fe.1.2