Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack A2 Configuration Guide 10-19
Command Defaults
• If no parameters are specified, all 802.1X settings will be displayed.
• If port-string is not specified, information for all ports will be displayed.
Examples
This example shows how to display the EAPOL port control mode for fe.1.1:
This example shows how to display the 802.1X quiet period settings for fe.1.1:
This example shows how to display all 802.1X authentication configuration settings for fe.1.1:
A2(rw)->show dot1x auth-config authcontrolled-portcontrol fe.1.1
Port 1: Auth controlled port control: Auto
A2(rw)->show dot1x auth-config quietperiod fe.1.1
Port 1: Quiet period: 30
A2(rw)->show dot1x auth-config fe.1.1
Port : 1 Auth-Config
PAE state: Initialize
Backend auth state: Initialize
Admin controlled directions: Both
Oper controlled directions: Both
Auth controlled port status: Authorized
Auth controlled port control: Auto
Quiet period: 60
Transmission period: 30
Supplicant timeout: 30
Server timeout: 30
Maximum requests: 2
Reauthentication period: 3600
Reauthentication control: Disabled