Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack A2 Configuration Guide 10-15
10.3.2.1 show dot1x
Use this command to display 802.1X status, diagnostics, statistics, and reauthentication or
initialization control information for one or more ports.
show dot1x [auth-config] [auth-diag] [auth-stats] [port [init | reauth]]
[port-string]
Syntax Description
Command Mode
Read-Only.
Command Defaults
• If no parameters are specified, 802.1X status will be displayed.
• If port-string is not specified, information for all ports will be displayed.
Examples
This example shows how to display 802.1X status:
auth-config (Optional) Display 802.1X authentication parameters.
auth-diag (Optional) Displays authentication diagnostics information.
auth-stats (Optional) Displays authentication statistics.
port init | reauth (Optional) Display the protocol version and initialization
control for the port.
port-string (Optional) Displays information for specific port(s). For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->show dot1x
DOT1X is disabled.