Specifications

Security Configuration Command Set
Configuring RADIUS
SecureStack A2 Configuration Guide 10-9
10.3.1.3 clear radius
Use this command to clear RADIUS server settings.
clear radius [retries] [timeout] [server [realm] {index | all}]
Syntax Description
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to clear all settings on all RADIUS servers
:
This example shows how to reset the RADIUS timeout to the default value of 20 seconds:
retries Resets the maximum number of attempts a user can contact
the RADIUS server before timing out to 3.
timeout Resets the maximum amount of time to establish contact
with the RADIUS server before timing out to 20 seconds.
server Deletes the RADIUS server settings.
realm (Optional) Resets the realm setting to the any-access
authentication.
index | all For use with the server parameter to clear the server
configuration for all servers or a specific RADIUS server as
defined by an index.
A2(rw)->clear radius server all
A2(rw)->clear radius timeout