Specifications

IGMP Configuration Command Set
Configuring IGMP
9-8 SecureStack A2 Configuration Guide
9.4.2.2 set igmpsnooping maxresponse
Use this command to configure the IGMP query maximum response time for the system. This value
must be less than the IGMP maximum response time as described in Section 9.4.2.1.
set igmpsnooping maxresponse time
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the IGMP maximum response time to 100 seconds:
time Specifies the IGMP maximum query response time. Valid
values are 100 - 255 seconds. This value works together with
the set igmpsnooping groupmembershipinterval
command to remove ports from an IGMP group and must be
less than the group membership interval value.
A2(rw)->set igmpsnooping maxresponse 100