Specifications

IGMP Configuration Command Set
Configuring IGMP
SecureStack A2 Configuration Guide 9-7
9.4.2.1 set igmpsnooping groupmembershipinterval
Use this command to configure the IGMP group membership interval time for the system. This
value sets the frequency of host-query frame transmissions and must be greater than the IGMP
maximum response time as described in Section 9.4.2.2.
set igmpsnooping groupmembershipinterval time
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the IGMP group membership interval to 250 seconds:
time Specifies the IGMP group membership interval. Valid
values are 2 - 3600 seconds. This value works together with
the set igmpsnooping maxresponsetime command to
remove ports from an IGMP group and must be greater than
the max response time value.
A2(rw)->set igmpsnooping groupmembershipinterval 250