Specifications

IGMP Configuration Command Set
Enabling / Disabling IGMP
9-4 SecureStack A2 Configuration Guide
9.4.1.2 set igmpsnooping adminmode
Use this command to enable or disable IGMP on the system.
set igmpsnooping adminmode {enable | disable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable IGMP on the system:
NOTE: In order for IGMP snooping to be enabled on one or all ports, it must be globally enabled
on the device with this command, and then enabled on a port(s) using the set igmpsnooping
interface mode command as described in Section 9.4.1.3.
enable | disable Enables or disables IGMP snooping on the system.
A2(rw)->set igmpsnooping adminmode enable