Specifications

IGMP Configuration Command Set
Enabling / Disabling IGMP
SecureStack A2 Configuration Guide 9-3
9.4.1.1 show igmpsnooping
Use this command to display IGMP snooping information. Configured information is displayed
whether or not IGMP snooping is enabled. Status information is displayed only when the function
is enabled. For information on enabling IGMP on the system, refer to Section 9.4.1.2. For
information on enabling IGMP on one or more ports, refer to Section 9.4.1.3.
show igmpsnooping
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display IGMP snooping information:
A2(rw)->show igmpsnooping
Admin Mode..................................... Enable
Group Membership Interval...................... 260
Max Response Time.............................. 100
Multicast Router Present Expiration Time....... 0
Interfaces Enabled for IGMP Snooping........... fe.1.1,fe.1.2,fe.1.3
fe.1.4,fe.1.5,fe.1.6
Multicast Control Frame Count..................0
Data Frames Forwarded by the CPU...............0