Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
8-14 SecureStack A2 Configuration Guide
8.3.3.3 clear port txq
Use this command to clear port transmit queue values back to their default values.
clear port txq port-string
Syntax Description
Command Defaults
By default, transmit queues are defined as follows:
Command Mode
Read-Write.
port-string Clears transmit queue values on specific port(s) back to
their default values. For a detailed description of possible
port-string values, refer to Section 3.1.1.
Queue Mode Weight
0WRR 1
1WRR 2
2WRR 3
3WRR 4
4WRR 5
5WRR 6
6 Strict (not configurable) –
7 Strict (not configurable) –