Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
SecureStack A2 Configuration Guide 8-11
8.3.3.1 show port txq
Use this command to display QoS transmit queue information for one or more ports.
show port txq [port-string]
Syntax Description
Command Defaults
If the port-string is not specified, the QoS setting of all physical ports will be
displayed.
Command Mode
Read-Only.
Example
This example shows how to display the current algorithm and transmit queue weights configured
on ports ge.1.10 through 24:
port-string (Optional) Specifies port(s) for which to display QoS
settings. For a detailed description of possible port-string
values, refer to Section 3.1.1.
NOTE: Only physical ports will be displayed. LAG ports have
no transmit queue information.
A2(su)->show port txq ge.1.10-24
Port Alg Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
----- --- --- --- --- --- --- --- --- ---
ge.1.10 WRR 2 10 15 20 24 29 SP SP
ge.1.11 WRR 2 10 15 20 24 29 SP SP
ge.1.12 WRR 2 10 15 20 24 29 SP SP
ge.1.13 WRR 2 10 15 20 24 29 SP SP
ge.1.14 WRR 2 10 15 20 24 29 SP SP
ge.1.15 WRR 2 10 15 20 24 29 SP SP
ge.1.16 WRR 2 10 15 20 24 29 SP SP
ge.1.17 WRR 2 10 15 20 24 29 SP SP
ge.1.18 WRR 2 10 15 20 24 29 SP SP
ge.1.19 WRR 2 10 15 20 24 29 SP SP
ge.1.20 WRR 2 10 15 20 24 29 SP SP
ge.1.21 WRR 2 10 15 20 24 29 SP SP
ge.1.22 WRR 2 10 15 20 24 29 SP SP
ge.1.23 WRR 2 10 15 20 24 29 SP SP
ge.1.24 WRR 2 10 15 20 24 29 SP SP