Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Priority to Transmit Queue Mapping
SecureStack A2 Configuration Guide 8-9
8.3.2.3 clear port priority-queue
Use this command to reset port priority queue settings back to defaults for one or more ports.
clear port priority-queue port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to clear the priority queue settings on fe.2.12:
port-string Specifies the port for which to clear priority-to-queue
mappings. For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(rw)->clear port priority-queue fe.2.12