Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Priority to Transmit Queue Mapping
SecureStack A2 Configuration Guide 8-7
8.3.2.1 show port priority-queue
Use this command to display the port priority levels (0 through 7, with 0 as the lowest level)
associated with the current transmit queue (0 through 5, with 0 being the lowest priority) for each
priority of the selected port. A frame with a certain port priority is transmitted according to the
settings entered using the set priority queue command described in Section 8.3.2.2.
show port priority-queue [port-string]
Syntax Description
Command Defaults
If port-string is not specified, priority queue information for all ports will be
displayed.
Command Mode
Read-Only.
Example
This example shows how to display priority queue information for fe.2.1. In this case, frames with
a priority of 0 are associated with transmit queue 1; frames with 1 or 2 priority, are associated with
transmit queue 0; and so forth:
port-string (Optional) Displays the mapping of priorities to transmit
queues for one or more ports.
A2(su)->show port priority-queue fe.2.1
Port P0 P1 P2 P3 P4 P5 P6 P7
--------- -- -- -- -- -- -- -- --
fe.2.1 1 0 0 2 3 4 5 5