Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Port Priority
8-2 SecureStack A2 Configuration Guide
3. Configuring Port Quality of Service (Section 8.3.3)
4. Configuring Port Traffic Rate Limiting (Section 8.3.4)
8.3 PORT PRIORITY AND RATE LIMITING CONFIGURATION
COMMAND SET
8.3.1 Configuring Port Priority
Purpose
To view or configure port priority characteristics as follows:
• Display or change the port default Class-of Service (CoS) transmit priority (0 through 7) of each
port for frames that are received (ingress) without priority information in their tag header.
• Display the current traffic class mapping-to-priority of each port.
• Set each port to transmit frames according to 802.1D (802.1p) priority set in the frame header.
Commands
The commands to configure port priority are listed below and described in the associated section.
• show port priority (Section 8.3.2.1)
• set port priority (Section 8.3.1.2)
• clear port priority (Section 8.3.1.3)