Specifications

Differentiated Services Configuration Command Set
Configuring Diffserv Policies and Assigning Classes
7-18 SecureStack A2 Configuration Guide
7.3.3.5 set diffserv policy mark
Use this command to mark all packets for the associated Diffserv traffic stream with a specific IP
DSCP or IP precedence value.
set diffserv policy mark {ipdscp | ipprecedence policyname classname value}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to mark packets matching the “admin” policy in the “system” class for
DSCP expedited forwarding precedence:
ipdscp |
ipprecedence
Specifies that packets will be marked with either an IP
DSCP or precedence value.
policyname Specifies the policy name being configured.
classname Specifies a Diffserv class to associate to this policy.
value Specifies an IP DSCP or precedence value. Valid numeric or
keyword DCSP values can be entered as listed in Table 7-1
on page 7-10. Valid precedence values are: 0 - 7.
A2(rw)->set diffserv policy mark ipdscp admin system ef