Specifications

Startup and General Configuration Summary
Using and Configuring WebView
2-10 SecureStack A2 Configuration Guide
2.1.4.4 set ssl
Use this command to enable or disable the use of WebView over SSL port 443. By default, SSL is
disabled on the switch. This command can also be used to reinitialize the hostkey that is used for
encryption.
set ssl {enable | disable | reinitialize | hostkey reinitialize}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable SSL:
enable | disable Enable or disable the ability to use WebView over SSL.
reinitialize Stops and then restarts the SSL process.
hostkey reinitialize Stops SSL, regenerates new keys, and then restarts SSL.
A2(rw)->set ssl enabled