Specifications

Differentiated Services Configuration Command Set
Globally Enabling or Disabling Diffserv
7-2 SecureStack A2 Configuration Guide
7.3 DIFFERENTIATED SERVICES CONFIGURATION COMMAND SET
7.3.1 Globally Enabling or Disabling Diffserv
Purpose
To globally enable or disable Diffserv on the device.
Command
The command used to globally enable or disable Diffserv on the device is listed below and
described in the associated section as shown.
• set diffserv adminmode (Section 7.3.1.1)
7.3.1.1 set diffserv adminmode
Use this command to globally enable or disable Diffserv on the device. By default, this function is
disabled at device startup.
set diffserv adminmode {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Diffserv:
enable | disable Enables or disables Diffserv.
A2(rw)->set diffserv adminmode enable