Specifications

Startup and General Configuration Summary
Using and Configuring WebView
2-8 SecureStack A2 Configuration Guide
2.1.4.2 set webview
Use this command to enable or disable WebView on the switch.
set webview {enable [ssl-only] | disable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable WebView on the switch:
enable | disable Enable or disable WebView on the switch.
ssl-only (Optional) Allow WebView access by means of SSL only.
A2(rw)->set webview disable
NOTE: It is good practice for security reasons to disable HTTP access on the switch
when finished configuring with WebView, and then to only enable WebView on the
switch when changes need to be made.